How to make a pillar candle – the simple hack involving a Pringles tube
Stacey Solomon shows how she made leaf candle holders
When you subscribe we will use the information you provide to send you these newsletters. Sometimes they’ll include recommendations for other related newsletters or services we offer. Our Privacy Notice explains more about how we use your data, and your rights. You can unsubscribe at any time.
You don’t need plastic moulds and fancy candle making kits to make thick pillar candles. All you need is an empty Pringles tube and a few essentials. This candle-making hack is sustainable, fun and pretty simple. Express.co.uk chatted to the team at Cosy Owl How To Make A Pillar Candle Using An Old Pringles Tub! to find out how to make a pillar candle.
Reusing old packaging is a great way to be sustainable and avoid waste.
If you don’t fancy buying plastic moulds for candle making, Cosy Owl has found a way to make a pillar candle using a Pringles tub.
These tubs are lined with aluminium foil and plastic which makes it the perfect candle-making vessel because it is super easy to unmold your candle.
How to make a pillar candle
You’ll need eight ingredients or tools to make the pillar candle. They are:
- An empty, clean and dry Pringles tub.
- 350g of pillar wax – Cosy Owl specifically used Kerawax 4600
- Fragrance oil 35ml – Cosy Owl specifically used citronella
- Wedo eco wick raw size 14
- A nail
- A hammer
- Some blue tack
- Something to hold your wick in place (we used a chopstick)
Start off by preparing your mould to fill with the wax to create a candle.
Wash your Pringles tub and dry it thoroughly using a clean cloth.
Then, using a nail and hammer, make a hole at the bottom of the tub. Ensuring that this is in the centre.
Your current tub is very tall, so you’ll need to shorten it. Cut your tub to about 15cm high all the way around.
Pour 350g of wax into a jug and place in a double boiler or bain-marie.
Once fully melted, with your thermometer, check that the wax is around the ideal temperature of 60C.
If it’s too hot, just pop it to one side and let it cool down for a few minutes.
As the wax is melting, dip your wick in the melted wax. Waxing the wick will stop it from burning too quickly or create soot.
Once the wax has set on the wick, feed the wick through the hole you made at the bottom.
Secure the hole with some blue tack to make sure no wax leaks through it. Centre your wick and secure it at the top (we used some blue tack and a chopstick).
Citronella candles are great to repel insects, and we designed this candle to be used outdoors.
Therefore we went with a high fragrance percent of 10 percent. Measure 35ml of fragrances oils, ensure your wax is at 60C then add your fragrance and stir gently for two minutes.
Before pouring your candle, you should make sure your wax is around 55C, this way the wax will set almost instantly. Slowly pour the wax into the mould.
Leave room at the top for a second pour in case some sinkholes appear in your candle.
Add more wax on the top if needed once your first layer is set.
Leave your candle for 24 to 48h ideally before unmoulding it.
Then, peel off the Pringles tub from the candle. Remove the blue tack at the bottom.
Your candle is now ready. Leave it to cure for a week or two if you can.
Source: Read Full Article